Arduino Project: Fingerprint Car Starter

Fingerprint Car Starter adalah projek yang membaca fingerprint bagi menghidupkan sebiji relay. Relay tersebut boleh dijadikan suis misalnya mengaktifkan litar car starter. Fingerprint terdapat fungsi seperti search user, add user, delete user, delete all user dan total user.

Skematiknya adalah seperti berikut.

PCB komponen layout nya adalah seperti berikut.

Senarai komponen projek Fingerprint Car Starter seperti berikut.
No Component Label Unit
1 005 PCB Arduino Relay Access (92mm X 50mm) PCB 1
2 Buzzer-PCB Mount Buzzer 1
3 Capacitor SMD1206 0.1uF C5 1
4 Capacitor SMD1206 10uF C1-C2 2
5 Capacitor SMD1206 22pF C3-C4 2
6 Crystal SMD 16MHz XTAL 1
7 DC Jack Female DC Jack Female 1
8 Diode SMD1206 1N4001 D1-D2 2
9 Fingerprint Sensor FPM10A UART2 1
10 IC ATMEGA328P-AU TQFP ATMEGA328 1
11 LED SMD Red 3.2mm X 1.6mm LED 1
12 OLED OLED 1
13 PCB Connector Header (Right) 4 Ways UART2 1
14 PCB Connector Header (Straight) 2 Ways PWR 1
15 PCB Connector Header (Straight) 3 Ways OUT 1
16 PCB Connector Housing 2 Ways PWR 1
17 PCB Connector Housing 3 Ways OUT 1
18 PCB Connector Housing 4 Ways UART2 1
19 PCB Stand (screw nut) PCB Stand 4
20 Push Button 4 pin 6x6x1 PB1-PB4 4
21 Relay 12V SPDT RLY 1
22 Resistor SMD1206 0.125W 10K R1 1
23 Resistor SMD1206 0.125W 330 R3-R4 2
24 Resistor SMD1206 0.25W 1K R2 1
25 Right Angle Pin Header (Male) ICSP 1
26 Slide Switch S1 1
27 Terminal Pin OUT 3
28 Terminal Pin PWR 2
29 Terminal Pin UART2 4
30 Transistor 2N2222 Q1-Q2 2
31 Voltage Regulator 5V SOT223 7805 1

Harga projek Fingerprint Car Starter adalah RM710 tidak termasuk bantuan teknikal. Di bawah adalah cara projek ini berfungsi.

50 Replies to “Arduino Project: Fingerprint Car Starter”

  1. Why do people who have no knoledge about electronics or coding ask the author stupid questions about, how much , code questions , I can have it and how (wtf?) , what components, and to make matters even worse, send multiple comments to get a response. I hate, stupid people, and people who wont help them selves.
    Oh, the best that gets me angry, ‘ you can contact me at …. ???????? – yeah right on dick head..!

    Excellent project by the way.

  2. Hello, I’m Hanim.
    I need your help, sir
    Im interested on this project. So a few questions to ask to you sir.
    1)what does components you used for this project?
    2)do this project need database to save finger id?
    3)what is the source code they are meaning in the previous comments?

    Thanks sir.

  3. Hello I’m Hanim.
    I need your help.
    1)What compenents you used for this project
    2)do this project need database to save the finger id?
    3)what is the source code they are meaning in the previous comments?

    Thanks sir

  4. Hello
    I’m interested in this project
    I can have it and how
    How much does it cost?
    if you can do it I want to know if it can activate a relay for 2 seconds?
    please be kindly invited to contact me
    regards.

Leave a Reply to valeriu Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.