Arduino Project: Fingerprint Car Starter
Fingerprint Car Starter adalah projek yang membaca fingerprint bagi menghidupkan sebiji relay. Relay tersebut boleh dijadikan suis misalnya mengaktifkan litar car starter. Fingerprint terdapat fungsi seperti search user, add user, delete user, delete all user dan total user.
Skematiknya adalah seperti berikut.
PCB komponen layout nya adalah seperti berikut.
| No | Component | Label | Unit |
|---|---|---|---|
| 1 | 005 PCB Arduino Relay Access (92mm X 50mm) | PCB | 1 |
| 2 | Buzzer-PCB Mount | Buzzer | 1 |
| 3 | Capacitor SMD1206 0.1uF | C5 | 1 |
| 4 | Capacitor SMD1206 10uF | C1-C2 | 2 |
| 5 | Capacitor SMD1206 22pF | C3-C4 | 2 |
| 6 | Crystal SMD 16MHz | XTAL | 1 |
| 7 | DC Jack Female | DC Jack Female | 1 |
| 8 | Diode SMD1206 1N4001 | D1-D2 | 2 |
| 9 | Fingerprint Sensor FPM10A | UART2 | 1 |
| 10 | IC ATMEGA328P-AU TQFP | ATMEGA328 | 1 |
| 11 | LED SMD Red 3.2mm X 1.6mm | LED | 1 |
| 12 | OLED | OLED | 1 |
| 13 | PCB Connector Header (Right) 4 Ways | UART2 | 1 |
| 14 | PCB Connector Header (Straight) 2 Ways | PWR | 1 |
| 15 | PCB Connector Header (Straight) 3 Ways | OUT | 1 |
| 16 | PCB Connector Housing 2 Ways | PWR | 1 |
| 17 | PCB Connector Housing 3 Ways | OUT | 1 |
| 18 | PCB Connector Housing 4 Ways | UART2 | 1 |
| 19 | PCB Stand (screw nut) | PCB Stand | 4 |
| 20 | Push Button 4 pin 6x6x1 | PB1-PB4 | 4 |
| 21 | Relay 12V SPDT | RLY | 1 |
| 22 | Resistor SMD1206 0.125W 10K | R1 | 1 |
| 23 | Resistor SMD1206 0.125W 330 | R3-R4 | 2 |
| 24 | Resistor SMD1206 0.25W 1K | R2 | 1 |
| 25 | Right Angle Pin Header (Male) | ICSP | 1 |
| 26 | Slide Switch | S1 | 1 |
| 27 | Terminal Pin | OUT | 3 |
| 28 | Terminal Pin | PWR | 2 |
| 29 | Terminal Pin | UART2 | 4 |
| 30 | Transistor 2N2222 | Q1-Q2 | 2 |
| 31 | Voltage Regulator 5V SOT223 | 7805 | 1 |
Harga projek Fingerprint Car Starter adalah RM710 tidak termasuk bantuan teknikal. Di bawah adalah cara projek ini berfungsi.
Why do people who have no knoledge about electronics or coding ask the author stupid questions about, how much , code questions , I can have it and how (wtf?) , what components, and to make matters even worse, send multiple comments to get a response. I hate, stupid people, and people who wont help them selves.
Oh, the best that gets me angry, ‘ you can contact me at …. ???????? – yeah right on dick head..!
Excellent project by the way.
Hello, I’m Hanim.
I need your help, sir
Im interested on this project. So a few questions to ask to you sir.
1)what does components you used for this project?
2)do this project need database to save finger id?
3)what is the source code they are meaning in the previous comments?
Thanks sir.
Need to buy project or get consultation face-2-face.
Hello I’m Hanim.
I need your help.
1)What compenents you used for this project
2)do this project need database to save the finger id?
3)what is the source code they are meaning in the previous comments?
Thanks sir
Projek ini perlukan database utk simpan finger id?
Hello
I’m interested in this project
I can have it and how
How much does it cost?
if you can do it I want to know if it can activate a relay for 2 seconds?
please be kindly invited to contact me
regards.
Can do.
You can contact me at http://shahrulnizam.com/about/