GSM Home Security 4 Input adalah projek untuk memantau rumah ketika keluar daripada rumah melalui GSM. Projek Arduino GSM Home Security 4 Input memasang empat magnetic switch pada mana-mana pintu masuk rumah.
Skematiknya adalah seperti di berikut.
PCB komponen layout nya adalah seperti berikut.
Senarai komponen projek Arduino GSM Home Security 4 Input seperti berikut.No | Component | Label | Unit |
---|---|---|---|
1 | 021 PCB Arduino Four Input (90mm X 46mm) | PCB | 1 |
2 | Buzzer-PCB Mount | Buzzer | 1 |
3 | Capacitor SMD1206 0.1uF | C3-C4 | 2 |
4 | Capacitor SMD1206 10uF | C1-C2 | 2 |
5 | Capacitor SMD1206 22pF | C5-C6 | 2 |
6 | Crystal 16MHz | XTAL | 1 |
7 | DC Jack Female | DC Jack Female | 1 |
8 | Diode SMD1206 1N4001 | D1 | 1 |
9 | GSM SIM900A | GSM | 1 |
10 | IC ATMEGA328P DIP | ATMEGA328 | 1 |
11 | IC Socket 28pin | ATMEGA328 | 1 |
12 | LCD 16X2 | LCD | 1 |
13 | Magnetic Contact Switch | SEN1-SEN4 | 4 |
14 | PCB Connector Header (Right) 3 Ways | SEN1-SEN4 | 4 |
15 | PCB Connector Header (Right) 4 Ways | GSM | 1 |
16 | PCB Connector Housing 3 Ways | SEN1-SEN4 | 4 |
17 | PCB Connector Housing 4 Ways | GSM | 1 |
18 | PCB Stand (screw nut) | PCB Stand | 6 |
19 | Resistor 0.25W 1K/4.7K | R2 | 1 |
20 | Resistor SMD1206 0.125W 10K | R1 | 1 |
21 | Resistor SMD1206 0.125W 330 | R3 | 1 |
22 | Resistor SMD1206 0.25W 1K | R4 | 1 |
23 | Right Angle Pin Header (Male) | ICSP | 1 |
24 | Slide Switch | S1 | 1 |
25 | Terminal Block 2 Way | DC | 1 |
26 | Terminal Pin | SEN1-SEN4 | 12 |
27 | Terminal Pin | GSM | 4 |
28 | Transistor 2N2222 | Q1 | 1 |
29 | Voltage Regulator 5V SOT223 | 7805 | 1 |
Harga projek Arduino GSM Home Security 4 Input adalah RM400 tidak termasuk bantuan teknikal. Di bawah adalah cara projek ini berfungsi.
52 responses to “Arduino Project: GSM Home Security 4 Input”
Hello,
it is a great project!
What tool do you use for drawing PCB?
thanks!
Dimi
Design PCB using Altium Designer.
Can you send code for me? Plz. Email: nguyentruong1606@gmail.com
Thanks!
I am new in designing PCB. Can you provide the project files for learning purpose?
Regards
Dimi
The project file not for free.
What is the price for whole altium project?
Regards
Dimi
MYR200 (USD47) for package software
1. Schematic and pcb design using Altium Designer
2. Arduino code using Arduino IDE
ok, send me your paypal and your contact data to my email:
d.minich@opsos.de
i will transfer 42€
I have send e-mail to you.
Your projects are perfect. But I can not find the codes. Please share
Source code not for free.
Can you make a design with hardware and software coding part for GSM based security system if please email me
Not for free
Berapa harga code? Kalau beli dgn projek yg dh siap berapa?
Mail the source code and what is payment method…
Can e-mail me at shahrulnizam.com@gmail.com for payment method.
Dear Concern
Its a good project. How can I get all the source codes! Please mail me details.
Source code not for free
Dear Concern
Greetings! I read other comments and understood that codes are not free. Now requesting for all details with code/ PCB design file if have, and payment details like price, method ( how I send) etc. please mail me on kallol0@gmail.com.
Thanks.
Kallol
Contact me http://shahrulnizam.com/about/ , there have e-mail address and whatsapp no.
Can you send code for me? Plz. Email: madjidelt@gmail.com
Code not for free
code not for free?
I sell the source code.
hello sir,
The email is not correct when am trying to reach you. Can you send me an email on navisenadreken96@outllok.com? Am interested in buying the program.
My e-mail shahrulnizam.com@gmail.com
I changed language in def.
now problem is it denied all numbers
I send ADD 1234567890 ( my phone 10 dig )
and allways send me
Your phone number is denied to give command.
PLEASE HOW TO CONFIGURE PHONE FORMAT AND PLEASE SEND LIST OF COMMANDS
if complicate, please tell me what lines in the code to comment in order to accept commands from any call
help me code
send livekiron@gmail.com
Code not for free
Dear Inventor
Greetings! Would you please send me the full Code for this project so that I can make one for my Home far away from my job place ( another district ).
Please do not hesitate to tell me if I have to pay. Its a great project you have made.
Thank you for sharing.
Kallol
The source code MYR100
Pls send code am biginer of arduino this code will ne bery use full for me
Not for free
How much do you charge for a complete parts list as well as the code needed to replicate this project?
The price is MYR100 (USD25) for schematic, pcb design, components list and source code.
Can pay using paypal.
Dear Developer,
Will you provide complete source code in C and also any help if I need to increase number of sensor input.
Not for free
Hi good project here i see. Want to buy the code what does it come with?
Thank you
Hi very good project you have here. I want the source code how to pay and is it $25 with all you have listed the (Source code, PCP designs and components)?
Can pay using paypal. There have paypal button at top right on this blog.
Then can contact me at http://shahrulnizam.com/about/
There have whatsapp, facebook or e-mail.
Sir,How do I get the code only.I can take care of the circuit
Code not for free
I’m doing RFID security lock system with smoke detector… can you help me out ?
I’m not doing free job.
Dear sir.. I need those code.. I am ready to pay. Please tell me the payment details and all…
You can contact me to buy source code here http://shahrulnizam.com/about/
great, you have a copy of the code that’s important sharing. Thank you
arlesquiceno82@gmail.com
Code not for free.
Please send 2 devices on and off control using sms send, receive projects full details
Not for free.
Assalamualaikum Shahrulnizam bro,
I want to purchase the code for this project.
Can you please share the charges.
Awaiting your earliest response.
waalaikumussalam, can contact me at http://shahrulnizam.com/about/