Fingerprint Attendance & Access System adalah projek Fingerprint Attendance System with GSM yang juga mempunyai fungsi Fingerprint Door Access.
Skematiknya adalah seperti berikut.
PCB komponen layout nya adalah seperti berikut.
Senarai komponen projek RF Fingerprint Attendance and Access System with GSM seperti berikut.No | Component | Label | Unit |
---|---|---|---|
1 | 072 PCB PIC Attendance System (119mm X 118mm) | PCB | 1 |
2 | Bell Switch | IN | 1 |
3 | Buzzer-PCB Mount | Buzzer | 1 |
4 | Capacitor Ceramic 0.1uF | C5 | 1 |
5 | Capacitor Electrolytic 10uF | C1-C2 | 2 |
6 | Cell Battery CR2032 | Battery 3V | 1 |
7 | Cell Battery Holder | Battery 3V | 1 |
8 | Crystal RTC 32.768kHz | XTAL2 | 1 |
9 | DC Jack Female | DC Jack Female | 1 |
10 | Diode 1N4001 | D1 | 1 |
11 | Fingerprint Sensor FPM10A | UART_1 | 1 |
12 | GSM SIM900A | UART_2 | 1 |
13 | IC DS1307 DIP | DS1307 | 1 |
14 | IC PIC18F46K22 DIP | PIC18F46K22 | 1 |
15 | IC Socket 40pin | PIC18F46K22 | 1 |
16 | IC Socket 8pin | DS1307 | 1 |
17 | Keypad 4X4 | Keypad | 1 |
18 | LCD 16X2 | LCD | 1 |
19 | Magnetic Door Lock 80mm | OUT | 1 |
20 | Mosfet IRF540 TO220 | Q2 | 1 |
21 | PCB Connector Header (Straight) 3 Ways | PWR_1 | 1 |
22 | PCB Connector Header (Straight) 3 Ways | UART_1 | 1 |
23 | PCB Connector Header (Straight) 3 Ways | PWR_12 | 1 |
24 | PCB Connector Header (Straight) 3 Ways | UART_2 | 1 |
25 | PCB Connector Housing 3 Ways | PWR_1 | 1 |
26 | PCB Connector Housing 3 Ways | UART_1 | 1 |
27 | PCB Connector Housing 3 Ways | UART_2 | 1 |
28 | PCB Connector Housing 3 Ways | PWR_2 | 1 |
29 | PCB Stand (screw nut) | PCB Stand | 8 |
30 | Resistor 0.25W 10K | R3-R6 | 4 |
31 | Resistor 0.25W 1K | R14, R16 | 2 |
32 | Resistor 0.25W 1K | R12-R13 | 2 |
33 | Resistor 0.25W 1K/4.7K | R9 | 1 |
34 | Resistor 0.25W 330 | R1 | 1 |
35 | Resistor 0.25W 330 | R7, R8, R10, R11 | 4 |
36 | RF Transceiver Module 433MHz 1km | RF | 1 |
37 | RFBee 433MHz 1km | RF | 1 |
38 | Right Angle Pin Header (Male) | ICSP | 1 |
39 | Slide Switch | S1 | 1 |
40 | Terminal Block 2 Way | IN | 1 |
41 | Terminal Block 2 Way | OUT | 1 |
42 | Terminal Block 2 Way | PWR | 1 |
43 | Terminal Pin | UART_1 | 3 |
44 | Terminal Pin | PWR_1 | 3 |
45 | Terminal Pin | UART_2 | 3 |
46 | Terminal Pin | UART_2 | 3 |
47 | Voltage Regulator 5V TO220 | 7805 | 1 |
48 | XBee Starter Kit without module | RF | 1 |
Harga projek RF Fingerprint Attendance and Access System with GSM adalah RM1600 tidak termasuk bantuan teknikal. Di bawah adalah cara projek ini berfungsi.
9 responses to “VB Project: Fingerprint Attendance & Access System with GSM”
Where can i find the platine for this construction?
Can you help me?
Not for free.
abng saya berminat.. email athazali@gmail.com or wasap 012 6939023..
assalamualaikum, nak tanya coding pakai apa ya? C++ ka?
Waalaikumussalam, guna C dan C++
saya berminat nak tahu lebih lanjut, boleh contact sy tak? 0175816725 ws @ email shahislamic96@gmail.com
E-mail dan whatsapp saya ada kat http://shahrulnizam.com/about/
can u send me souce code for this project?
No