VB Project: Fingerprint Attendance System (PIC)
Fingerprint Attendance System adalah projek mengambil kedatangan menggunakan Fingerprint Reader. Nama pengguna didaftarkan melalui VB dan disimpan di dalam database Access. Ia dihubungkan dengan komputer secara wireless melalui RF.
Skematiknya adalah seperti berikut.
| No | Component | Label | Unit |
|---|---|---|---|
| 1 | 072 PCB PIC Attendance System (119mm X 118mm) | PCB | 1 |
| 2 | Buzzer-PCB Mount | Buzzer | 1 |
| 3 | Capacitor Ceramic 0.1uF | C5 | 1 |
| 4 | Capacitor Electrolytic 10uF | C1-C2 | 2 |
| 5 | Cell Battery CR2032 | Battery 3V | 1 |
| 6 | Cell Battery Holder | Battery 3V | 1 |
| 7 | Crystal RTC 32.768kHz | XTAL2 | 1 |
| 8 | DC Jack Female | DC Jack Female | 1 |
| 9 | Diode 1N4001 | D1 | 1 |
| 10 | Fingerprint Sensor FPM10A | UART_1 | 1 |
| 11 | IC DS1307 DIP | DS1307 | 1 |
| 12 | IC PIC18F46K22 DIP | PIC18F46K22 | 1 |
| 13 | IC Socket 40pin | PIC18F46K22 | 1 |
| 14 | IC Socket 8pin | DS1307 | 1 |
| 15 | Keypad 4X4 | Keypad | 1 |
| 16 | LCD 16X2 | LCD | 1 |
| 17 | PCB Connector Header (Straight) 3 Ways | UART_1 | 1 |
| 18 | PCB Connector Header (Straight) 3 Ways | PWR_1 | 1 |
| 19 | PCB Connector Housing 3 Ways | UART_1 | 1 |
| 20 | PCB Connector Housing 3 Ways | PWR_1 | 1 |
| 21 | PCB Stand (screw nut) | PCB Stand | 8 |
| 22 | Resistor 0.25W 10K | R3-R6 | 4 |
| 23 | Resistor 0.25W 1K | R12-R13 | 2 |
| 24 | Resistor 0.25W 1K/4.7K | R9 | 1 |
| 25 | Resistor 0.25W 330 | R7, R8, R10, R11 | 4 |
| 26 | Resistor 0.25W 330 | R1 | 1 |
| 27 | RF Transceiver Module 433MHz 1km | RF | 1 |
| 28 | RFBee 433MHz 1km | RF | 1 |
| 29 | Right Angle Pin Header (Male) | ICSP | 1 |
| 30 | Slide Switch | S1 | 1 |
| 31 | Terminal Block 2 Way | PWR | 1 |
| 32 | Terminal Pin | PWR_1 | 3 |
| 33 | Terminal Pin | UART_1 | 3 |
| 34 | Voltage Regulator 5V TO220 | 7805 | 1 |
| 35 | XBee Starter Kit without module | RF | 1 |
Harga projek PIC RF Fingerprint Attendance System adalah RM1300 tidak termasuk bantuan teknikal. Di bawah adalah cara projek ini berfungsi.
Hi!
I was out for a while, but i need to know if i can modify the code to match my Design, what kind of compiler your using
so if i get the code i can modify!them.
Using compiler XC8
Hi!
I need the Source Code and Data Base Program, also source code for the data base Program.
how Much will Cost is US dollar.
Need replay,
its Urgent.
Schematic, PCB Design, PIC code and VB code is MYR300 (USD70)
I want its program code. How much it is??
Moyurgoswam@gmail.com it’s my mail id, plz rply me on mail
Source code price MYR300 (USD68)
hi good afternoon thanks for this project i need this project code and little help please send me the code and guide
thanks in advance
Not for free
hey,good work,liked your project ,really neat man,was asking if you could share the code with me.Also need assistance on getting a custom PCB printout like the one youve got there..
Need to pay
Hi, I want the code and how much you looking for ?
Source code this project MYR300
berapa harga untuk full projek ini boleh email kan proposal kepada saya? ( syhrafatin@yahoo.com )
assalamualaikum .. boleh tau lokasi kat mana?
waalaikumussalam, kat Selayang.