RF RFID Attendance System with GSM adalah projek RFID Attendance System yang mempunyai tambahan fungsi GSM.
Projek ini boleh digunakan untuk mengambil kedatangan pelajar di sekolah. Fungsi GSM adalah untuk menghantar SMS kepada ibu bapa atau penjaga pada waktu pelajar sampai ke sekolah bagi memberitahu ibu bapa atau penjaga bahawa anak mereka telah hadir ke sekolah.
Skematiknya adalah seperti berikut.
PCB komponen layout nya adalah seperti berikut.
| No | Component | Label | Unit |
|---|---|---|---|
| 1 | 072 PCB PIC Attendance System (119mm X 118mm) | PCB | 1 |
| 2 | Buzzer-PCB Mount | Buzzer | 1 |
| 3 | Capacitor Ceramic 0.1uF | C3 | 1 |
| 4 | Capacitor Electrolytic 10uF | C1-C2 | 2 |
| 5 | Cell Battery CR2032 | Battery 3V | 1 |
| 6 | Cell Battery Holder | Battery 3V | 1 |
| 7 | Crystal RTC 32.768kHz | XTAL | 1 |
| 8 | DC Jack Female | DC Jack Female | 1 |
| 9 | Grove – 125KHz RFID Reader | UART1 | 1 |
| 10 | GSM SIM900A | UART2 | 1 |
| 11 | IC 74HC4052 DIP | 74HC4052 | 1 |
| 12 | IC DS1307 DIP | DS1307 | 1 |
| 13 | IC PIC18F46K22 DIP | PIC18F46K22 | 1 |
| 14 | IC Socket 16pin | 74HC4052 | 1 |
| 15 | IC Socket 40pin | PIC18F46K22 | 1 |
| 16 | IC Socket 8pin | DS1307 | 1 |
| 17 | Keypad 4X4 | Keypad | 1 |
| 18 | LCD 16X2 | LCD | 1 |
| 19 | PCB Connector Header (Right) 3 Ways | PWR1 | 1 |
| 20 | PCB Connector Header (Right) 3 Ways | PWR2 | 1 |
| 21 | PCB Connector Header (Right) 3 Ways | UART2 | 1 |
| 22 | PCB Connector Header (Right) 3 Ways | UART1 | 1 |
| 23 | PCB Connector Housing 3 Ways | UART2 | 1 |
| 24 | PCB Connector Housing 3 Ways | PWR2 | 1 |
| 25 | PCB Connector Housing 3 Ways | UART1 | 1 |
| 26 | PCB Connector Housing 3 Ways | PWR1 | 1 |
| 27 | PCB Stand (screw nut) | PCB Stand | 8 |
| 28 | Resistor 0.25W 10K | R2-R5 | 4 |
| 29 | Resistor 0.25W 1K | R11-R12 | 2 |
| 30 | Resistor 0.25W 1K/4.7K | R8 | 1 |
| 31 | Resistor 0.25W 330 | R6, R7, R9, R10 | 4 |
| 32 | Resistor 0.25W 330 | R1 | 1 |
| 33 | RF Transceiver Module 433MHz 1km | RF | 1 |
| 34 | RFBee 433MHz 1km | RF | 1 |
| 35 | RFID Tag 125kHz | UART1 | 5 |
| 36 | Right Angle Pin Header (Male) | ICSP | 1 |
| 37 | Slide Switch | S1 | 1 |
| 38 | Terminal Block 2 Way | PWR | 1 |
| 39 | Terminal Pin | UART2 | 3 |
| 40 | Terminal Pin | UART1 | 3 |
| 41 | Terminal Pin | PWR2 | 3 |
| 42 | Terminal Pin | PWR1 | 3 |
| 43 | Voltage Regulator 5V TO220 | 7805 | 1 |
| 44 | XBee Starter Kit without module | RF | 1 |
Harga projek RF RFID Attendance System with GSM adalah RM1100 tidak termasuk bantuan teknikal. Di bawah adalah cara projek ini berfungsi.
8 responses to “VB Project: RFID Attendance System with GSM”
Assalammualaikum . Maaf ganggu . Saya nak tanya harga total sekali dengan bantuan teknikal berapa ? Boleh bagi full komponen projek ni ? Terima kasih .
Waalaikumussalam, Zarul. Sila hubungi saya kat http://shahrulnizam.com/about/
Assalammualaikum, Hi whats a prizes this projects?
I am looking for a biometric solution Rfid on earrings to control the quantities of goats that daily leave and enter in the corral.
This equipment must send to one or two mobile phones – GSM Lan – an SMS with the total amount of animals that entered and that left the corral.
Hello good day
I am looking for a biometric solution Rfid on earrings to control the quantities of goats that daily leave and enter in the corral.
This equipment must send to one or two mobile phones – GSM Lan – an SMS with the total amount of animals that entered and that left the corral. This SMS should be sent after all the goats have left in the morning and after all have entered the corral in the evening. I just want to know if the herd is complete, I do not need to know which animal is missing.
The corral has 30/30 meters, only one gate to go out or enter one goat at a time. There are currently 500 goats.
I’ve checked your product
and I think that by adapting an antenna on the Rfid reader or replacing the Rfid Reader with a more powerful – read one meter, it may serve this purpose.
Please tell me if you can fulfill my entire request:
1000 Rfid earrings ( 134,2 Kz / 13,56 Mhz) and the plier to fix the earrings.
1 Rfid reader capable of reading 1 Rfid earring 1 meter away to install in the gate
1 GSM transmission module to send 1 or 2 SMS in the morning and in the evening for 2 mobile phones.
Solar panel to provide energy support.
I will provide the battery locally.
I am attaching the technical specifications of RFID earrings for animals.
I await your best proposal.
Best regardshttps://ssl.gstatic.com/ui/v1/icons/mail/images/cleardot.gif
José Carlos Carvalho
Mobille: +244 923316042
Skype: Aitec1jcarlos
You can contact me at http://shahrulnizam.com/about/
Der Shahr-ul-Nizam
your project is very good , please tel me how many rfid card store in this system, can you send me the component name do you used in this project.
Allah Hafiz
Tahseen Mohammad Khan
1. Unlimited user because use database in the laptop/computer
2. There given the schematic. You need to write component list on your own