Fingerprint Car Starter adalah projek yang membaca fingerprint bagi menghidupkan sebiji relay. Relay tersebut boleh dijadikan suis misalnya mengaktifkan litar car starter. Fingerprint terdapat fungsi seperti search user, add user, delete user, delete all user dan total user.
Skematiknya adalah seperti berikut.
PCB komponen layout nya adalah seperti berikut.
Senarai komponen projek Fingerprint Car Starter seperti berikut.No | Component | Label | Unit |
---|---|---|---|
1 | 005 PCB Arduino Relay Access (92mm X 50mm) | PCB | 1 |
2 | Buzzer-PCB Mount | Buzzer | 1 |
3 | Capacitor SMD1206 0.1uF | C5 | 1 |
4 | Capacitor SMD1206 10uF | C1-C2 | 2 |
5 | Capacitor SMD1206 22pF | C3-C4 | 2 |
6 | Crystal SMD 16MHz | XTAL | 1 |
7 | DC Jack Female | DC Jack Female | 1 |
8 | Diode SMD1206 1N4001 | D1-D2 | 2 |
9 | Fingerprint Sensor FPM10A | UART2 | 1 |
10 | IC ATMEGA328P-AU TQFP | ATMEGA328 | 1 |
11 | LED SMD Red 3.2mm X 1.6mm | LED | 1 |
12 | OLED | OLED | 1 |
13 | PCB Connector Header (Right) 4 Ways | UART2 | 1 |
14 | PCB Connector Header (Straight) 2 Ways | PWR | 1 |
15 | PCB Connector Header (Straight) 3 Ways | OUT | 1 |
16 | PCB Connector Housing 2 Ways | PWR | 1 |
17 | PCB Connector Housing 3 Ways | OUT | 1 |
18 | PCB Connector Housing 4 Ways | UART2 | 1 |
19 | PCB Stand (screw nut) | PCB Stand | 4 |
20 | Push Button 4 pin 6x6x1 | PB1-PB4 | 4 |
21 | Relay 12V SPDT | RLY | 1 |
22 | Resistor SMD1206 0.125W 10K | R1 | 1 |
23 | Resistor SMD1206 0.125W 330 | R3-R4 | 2 |
24 | Resistor SMD1206 0.25W 1K | R2 | 1 |
25 | Right Angle Pin Header (Male) | ICSP | 1 |
26 | Slide Switch | S1 | 1 |
27 | Terminal Pin | OUT | 3 |
28 | Terminal Pin | UART2 | 4 |
29 | Terminal Pin | PWR | 2 |
30 | Transistor 2N2222 | Q1-Q2 | 2 |
31 | Voltage Regulator 5V SOT223 | 7805 | 1 |
Harga projek Fingerprint Car Starter adalah RM720 tidak termasuk bantuan teknikal. Di bawah adalah cara projek ini berfungsi.
50 responses to “Arduino Project: Fingerprint Car Starter”
jenis arduino yang mana ye digunakan?
shahrurrahem, dah bagi skematik di atas guna Atmega328 compatible dgn Arduino Uno.
i wanted the code for making this stuff work. Can you provide it?
Code not for free.
how much?
PCB Design and source code MYR200.
ade projet yg simple tak untuk start kereta pakai tamb print ni.tq
X de. Ini yg paling simple.
boleh emailkn kt sy componen yang digunakn … sy ingin mencuba nya dirumah
Kena beli projek.
gan.project di atas brp harganya?
gan ada nmr tlp yg bisa di hubungi?klo ada bisa kirim ke ndozenk@gmail.com
Boleh hubungi di http://shahrulnizam.com/about/
halo bagaimana saya bisa membeli ini dari Anda ? saya perlu siap membuat sirkuit ini pemula mobil menggunakan scanner fringerprint
Boleh hubungi saya di http://shahrulnizam.com/about/
salam. saya ingin menggunakan fingerprint untuk menggerakkan motor untuk membuka pintu. boleh nyatakan kos untuk membuat projek itu?
w/salam, untuk harga sila hubungi saya kat http://shahrulnizam.com/about/
Hi would you be able jus to send me the program that you used in your micro controller please and thank you
Not for free.
Could you design a attendance system similar to this one, like whenever a teacher first selects a class then he scans his finger then it displays subject he teaches, ones he selects the subject and students scan their finger it identifies the students and display their name, ones all the students have scanned their fingers and same teacher again scans his finger it generates a mail and send that mail to a email id, containing names of all the students present on that date. you could use esp8266 12e node mcu as it has inbuilt wifi, r305 for fingerprint sensor and any display say oled 0.96″ display as you already have them.
Can design.
Hello,
Can i get in contact with you? Please sent me e-mail to my e-mail address.
thanks
Contact me at shahrulnizam.com/about
I need code for fingerprints based vehicle starter can u plz help me and give me the code.
Need to pay
sent bahasa c untuk projek ini
Source code kena bayar
helo my name is usman ali
bhai je mujay daiya gram to mil gai per ya nai pata chala ka ap ne osay program kaisay keya ha
.aghur ho sakay to mujay os ka baray ma pory detail beta dejeya ga .email ker ka
email{ali_razasnw@yahoo.com}
Hi,
The hardware is ready, the code is missing. How much does it cost?
The source code is MYR200 (USD46)
Good afternoon, my name is Guilherme, from Brazil. I’m using arduino and doing some changes in my car. I like your project very much. Could you send me the values of code and more information about the hardware? Thanks.
Hi, e-mail me at http://shahrulnizam.com/about/
Please give me code
Thanks you
Not for free
How much does it cost for source code?
The software (schematic, pcb design and source code) is MYR200 (USD49)
Do you have any project of starting a vehicle through Android ? Like By sending message or a call the vehicle should get started .
Not do yet. You need to order project to I make it.
Yes. There is solution for. starting a vehicle through Android
i need to buy source code
i will pay you money
Can contact me at http://shahrulnizam.com/about/
I want to buy complete unit.
pgpk99@gmail.com
Can contact me at http://shahrulnizam.com/about/
Hello
I’m interested in this project
I can have it and how
How much does it cost?
if you can do it I want to know if it can activate a relay for 2 seconds?
please be kindly invited to contact me
regards.
Can do.
You can contact me at http://shahrulnizam.com/about/
Projek ini perlukan database utk simpan finger id?
Hello I’m Hanim.
I need your help.
1)What compenents you used for this project
2)do this project need database to save the finger id?
3)what is the source code they are meaning in the previous comments?
Thanks sir
Hello, I’m Hanim.
I need your help, sir
Im interested on this project. So a few questions to ask to you sir.
1)what does components you used for this project?
2)do this project need database to save finger id?
3)what is the source code they are meaning in the previous comments?
Thanks sir.
Need to buy project or get consultation face-2-face.
Why do people who have no knoledge about electronics or coding ask the author stupid questions about, how much , code questions , I can have it and how (wtf?) , what components, and to make matters even worse, send multiple comments to get a response. I hate, stupid people, and people who wont help them selves.
Oh, the best that gets me angry, ‘ you can contact me at …. ???????? – yeah right on dick head..!
Excellent project by the way.